Automobile repair SSW (ii): the Grade 2 exception, experience and support evidence
You'll learn: Distinguish the three-year assessment route from the national Grade 2 route and check the employer and support agency independently.
about 5 min read
Automobile-repair SSW (ii) has two skill routes that must not be flattened into one. The field manual lists the SSW (ii) assessment and Japan's Grade 2 automobile mechanic skills examination. The additional three-year practical-experience requirement applies to the SSW (ii) assessment route. Its table expressly limits that requirement to that assessment. A person using the listed Japanese national Grade 2 qualification is not automatically subject to the same separate three-year requirement. This does not turn an overseas certificate called level two into the Japanese qualification or remove the real SSW (ii) duties.
For the assessment route, the experience must be actual automobile maintenance at a workshop certified under Article 78 of Japan's Road Transport Vehicles Act. It is not any three years on a car company's payroll, overseas garage employment, reception work or vehicle sales. JASPA says the required three years must exist by the day before the examination. Qualifying periods at several employers can be accumulated, and automobile-maintenance Technical Intern Training periods can count. Preserve accurate dates and actual work; do not double-count overlapping periods or invent experience for an attractive test date.
SSW (ii) work involves daily, periodic and specified maintenance and associated general work while guiding other personnel. The assessment measures judgment about required work and the ability to instruct others. It is not simply a reward for being a longer-serving SSW (i) worker. A change to SSW (ii) requires the actual immigration process; remaining in SSW (i) and intending to take a test does not by itself change the person's permission or extend its cumulative limit.
The practical-test exemption is narrower than the whole skill route. MLIT's assessment rules allow completion of the designated foreign-worker skills training course to exempt the practical portion within the stated two-year window. JASPA warns that, without that recognised exemption, the theory and practical tests must both be taken on the same day and passed. Taking theory alone does not produce a valid pass, even with a good theory result. An ordinary preparation class or employer induction is not automatically that designated course. Check the completion document, provider and current timing before selecting an exemption.
Employer-side conditions remain independent. The actual certified workshop and employer council membership must be established before immigration applications. Direct employment is required; dispatching a mechanic from a manpower firm is not a substitute. The employer must cooperate with the council and ministry and issue relevant practical-experience evidence when the worker requests it. Do not confuse the absence of a council membership fee with a free visa, free assessment or a promise that every recruitment charge is acceptable.
Where the whole SSW (i) support plan is outsourced, the registered support agency also needs field council membership and the required expertise: a person with Japanese Grade 1 or Grade 2 mechanic qualification, or at least five years of instruction experience at a mechanic training institution described by the rules. Five years as a mechanic is not the same as five years teaching at the qualifying institution. MLIT's guide also explains that the qualified person need not necessarily hold the named support-manager role or be full-time if an adequate support system exists. SSW (ii) does not carry the mandatory SSW (i) support-plan obligation, but it still needs a compliant employer and actual permission.
Keep a private evidence map rather than collecting staff qualifications yourself. Separate the worker's route, experience, test or qualification, workshop, employer council and any SSW (i) support agency. Use the current official instructions, not a copied old quarterly immigration-reporting schedule from an older guide.
Separate two fictional candidates: assessment plus certified-workshop experience, and Japanese Grade 2. Add employer council and any SSW (i) support-agency checks.
Fictional practice situation, not a real case: Pooja has accumulated qualifying maintenance experience at two certified Japanese workshops and plans the SSW (ii) assessment. Her friend has the listed Japanese Grade 2 qualification and is considering that alternative. They do not impose Pooja’s additional experience rule on the friend. Pooja’s ordinary coaching class does not exempt the practical test; she checks the designated-course route instead.
Check the current official instructions for the exact category, location and circumstances. These exercises are not a complete rulebook or submission checklist.
Check the official page ↗Separate two fictional candidates: assessment plus certified-workshop experience, and Japanese Grade 2. Add employer council and any SSW (i) support-agency checks.
“Does every automobile-repair SSW (ii) candidate need the same three years and a private course exemption?”
Notes stay only in this browser tab. They are not saved or sent anywhere, and they disappear when you leave the page.
No. The three-year requirement is attached to the assessment route, not the listed Japanese Grade 2 alternative. A practical exemption requires the designated course and applicable conditions, not any private class.
Sources
This lesson states no official rules, so it has no sources to list.
Marking is for your own tracking. It does not show you are ready or approved.


